This fabric is made to meet the physical requirements of .
MultiCam® camouflage is a single camouflage pattern designed to help the wearer hide in varied environments, seasons, elevations, and light conditions. It was designed to address the real-world need for concealment in different environments, with one basic kit of gear. While there are many great location-specific patterns, MultiCam® is designed to work well across a very broad range of environmental conditions when observed in both the visual and near infrared (NIR) spectrums.
Made in the USA to mil-spec DTL32439, Type III, Class 3. Always first quality fabric. Some key requirements:
3.8 Physical Requirements
| Characteristic | Weight | Yarns per inch | Breaking Strength | Abrasion Resistance | Hydrostatic Resistance | |||
| oz/sq yd | Minimum | LB (min) | ||||||
| Min | Max | Warp | Filling | Warp | Filling | Minimum Cycles | Water, cm | |
| Type III, Class 3 | 7.0 | 8.0 | 48 | 35 | 300 | 225 | 700 | 35 |
3.16 Toxicity The finished fabric shall not present a health hazard and shall show compatibility with prolonged, direct skin contact when tested as specified in 4.4.5. Chemicals recognized by the Environmental Protection Agency (EPA) as human carcinogens shall not be used.
*** ARID has been discontinued ***
